Avis : MyCargoRacks.com est financé par ses lecteurs. Lorsque vous achetez via les liens de notre site, nous pouvons percevoir une commission d'affiliation sans frais supplémentaires pour vous. En savoir plus

Lippert Scissor Jack 30" 2-Pack

Name: Lippert Scissor Jack 30" 2-Pack
Brand: Lippert
Price: 109.99 USD

7,500 lb scissor jacks with 30-inch reach for taller trailers

Last reviewed: April 2026

rv_levelingground_placed

Steel scissor jack pair rated at 7,500 lbs each with 30 inches of height for taller rigs. Same mechanical crank design as the 24-inch model but with 6 additional inches of reach. At 35 lbs for the pair, built for fifth wheels and larger travel trailers.

Prix Fabricant~154 $

Approx., converti depuis le prix conseillé US.

Voir le prix sur Amazon

Le prix peut varier. Les prix et la disponibilité sont susceptibles de changer.

En savoir plus sur Lippert

Rédigé à l'origine par MyCargoRacks en anglais, traduit et adapté pour la pertinence locale. Contenu recherché et localisé pour les lecteurs de Canada (français).

En un coup d'œil

Fiche rapide

Leveling TypeStabilizer Jack

Weight Capacity3402 kg

Max Lift Height76 cm

RV Type Compatibilitytravel_trailer, fifth_wheel

Pourquoi ce produit

Pourquoi le Lippert Scissor Jack 30" 2-Pack ?

The 30-inch version for rigs that sit higher off the ground. Same 7,500 lb rating per jack. At 35 lbs for the pair, they split the difference between BAL's 40 lb pair and the lighter 24-inch models. If your frame sits above 24 inches, you need these. No point fighting with jacks that do not reach.

Spécifications détaillées

Toutes les spécifications

Leveling Type	Stabilizer Jack
Weight Capacity	3402 kg
Max Lift Height	76 cm
RV Type Compatibility	travel_trailer, fifth_wheel

Interlocking	No
Pieces Per Set	1
Anti-Slip Surface	Yes
Storage Bag Included	No

Material	Steel
UV Resistant	Yes
Freeze Resistant	Yes

Meilleurs prix

Où acheter

Revendeur	Prix	Statut
Amazon CA	Voir le prix	Vérifier la disponibilité	Check Price

Performance analysis

Insights for Lippert Scissor Jack 30" 2-Pack

How It Compares

vs. average in rv_leveling

Score Breakdown

Category Position

Price vs. score for all rv_leveling

Alternatives

Comparaisons phares

Alternatives les plus pertinentes au Lippert Scissor Jack 30" 2-Pack

Outil de comparaison

EAZ LIFT

EAZ LIFT Scissor Jack Pair

RV Levelingstabilizer_jack

Voir le prix

EAZ LIFT

EAZ LIFT King Pin Stabilizer

RV Levelingstabilizer_jack

Voir le prix

BAL

BAL C-Jack 19" Pair

RV Levelingstabilizer_jack

Voir le prix

Ultra-Fab

Ultra-Fab Stacker Jacks 4-Pack

RV Levelingstabilizer_jack

Voir le prix

Plus d'options

Supports similaires

Autres RV Leveling les mieux notés

Ultra-Fab

Ultra-Fab Stacker Jacks 2-Pack

RV Levelingstabilizer_jack

~105 $Prix conseillé

EAZ LIFT

EAZ LIFT King Pin Stabilizer

RV Levelingstabilizer_jack

~182 $Prix conseillé

BAL

BAL Classic Scissor Jack 30" 2-Pack

RV Levelingstabilizer_jack

~365 $Prix conseillé

EAZ LIFT

EAZ LIFT Scissor Jack Pair

RV Levelingstabilizer_jack

~112 $Prix conseillé

D'autres personnes ont aussi consulté

Camco

Camco Curved Leveler 2-Pack

RV Levelingdrive_on_leveler

~112 $Prix conseillé

EAZ LIFT

EAZ LIFT Scissor Jack Pair

RV Levelingstabilizer_jack

~112 $Prix conseillé

Ultra-Fab

Ultra-Fab Stacker Jacks 2-Pack

RV Levelingstabilizer_jack

~105 $Prix conseillé

Beech Lane

Beech Lane Wireless Leveling System

RV Levelingrv_level_tool

~84 $Prix conseillé

EAZ LIFT

EAZ LIFT King Pin Stabilizer

RV Levelingstabilizer_jack

~182 $Prix conseillé

Hopkins Endurance

Hopkins Endurance Smart Level

RV Levelingrv_level_tool

~21 $Prix conseillé

Questions fréquentes

Foire aux questions

It mounts to the frame rail and extends to the lift height in its name. Measure your frame-to-ground height first. It installs bolt-on or weld-on, so an existing jack's holes will not necessarily line up.

5,000 lbs per jack — not per set. This is a set of 2, so the figure on the box may appear as a total; it is 5,000 lbs times 2, and no single jack does more than its own share. Match the per-jack number against the weight actually resting on that corner, which is a fraction of the trailer's weight, not all of it.

No. A stabilizer stops the trailer rocking when you walk around inside it. It is not a lift, and it is not a jack stand. Raising a trailer on stabilizers can bend the frame at the mounting point, and it puts the whole thing on hardware that was never rated to hold it up. Use a bottle jack at a designated lift point, then support the load on stands, and only then go underneath.

This is a set of 2. Four is the normal number for a travel trailer — one at each corner — so a pair covers one end and most owners end up buying two sets. Placing them just inside the corners rather than at the extreme ends does more to stop the rocking, because that is where the frame is stiffest.

Universal bolt-on. Bolting is within reach of anyone with a drill and a socket set; welding is not a driveway job. Either way, mount to the frame rail itself, never to sheet metal or a bed liner — the jack will hold, and the thing it is bolted to will not.

Put something under the foot. A jack pad or a scrap of dimensional lumber spreads the load so the foot does not press into gravel, sand or soft turf. This is not about grip — a stabilizer is not trying to resist sliding, it is trying not to sink. On asphalt in summer heat, a pad also keeps the foot from leaving a dent you will be asked about.

Répondu par Michael Rollins, Chief Editor

Lippert Scissor Jack 30" 2-Pack

Fiche rapide

Pourquoi le Lippert Scissor Jack 30" 2-Pack ?

Toutes les spécifications

Dealbreaker Specs

Important Specs

Nice to Know

Technical Details

Additional Specs

Où acheter