Avviso: MyCargoRacks.com è supportato dai lettori. Quando acquisti tramite i link sul nostro sito, potremmo guadagnare una commissione di affiliazione senza costi aggiuntivi per te. Scopri di più

TracRac SR Sliding Truck Rack

Name: TracRac SR Sliding Truck Rack
Brand: TracRac
Price: 551.08 EUR
Availability: InStock
Rating: 4.3

Heavy-duty truck bed rack for ladders, lumber, and cargo

Last reviewed: March 2026

truck_racktruck_bed_rail

Scritto originariamente da MyCargoRacks in inglese, tradotto e adattato per rilevanza locale. Contenuto ricercato e localizzato per lettori di Italia.

A colpo d'occhio

Dati rapidi

Portata—

Peso33 kg

Materialealuminum

Montaggiotruck_bed_rail

Perché questo prodotto

Perché il TracRac SR Sliding Truck Rack?

The SR Sliding lets you reposition crossbars along the bed rails — slide them forward for short loads, spread them apart for long ones. 73 lbs in steel, tonneau compatible, no drilling, adjustable height. The sliding feature is the key differentiator: no other truck rack in this lineup offers crossbar repositioning. If your loads vary in length, this flexibility has practical value.

Specifiche dettagliate

Tutte le specifiche

Rack Type	Bed Rack
Tonneau Compatible	Yes
Drilling Required	No

Crossbar Count	2
Crossbar Capacity	363 kg
Clamp-On Install	Yes
Adjustable Height	Yes

T-Slot Channels

Yes

Migliori prezzi

Dove acquistare

Rivenditore	Prezzo	Stato
Amazon US	Vedi prezzo	Verifica disponibilità	Check Price

Analisi delle prestazioni

Analisi di TracRac SR Sliding Truck Rack

Come si confronta

vs. media in truck_rack

Dettaglio del voto

Posizione in categoria

Prezzo vs. voto per tutti i truck_rack

Feedback della community

Cosa dicono gli utenti

Amazon

4.3/5

Basato su 702 recensioni

78% positivo10% negativo

Pregi più citati

“Heavy duty”
“Adjustable”
“Good clearance”

Difetti più citati

“Heavy”
“Complex install”

4.4/5

Basato su 67 recensioni

80% positivo8% negativo

Pregi più citati

“Sliding crossbars”
“Access bed with rack loaded”
“Aircraft aluminum”

Difetti più citati

“Expensive”
“Complex install”

Alternative

Confronti principali

Alternative più pertinenti a TracRac SR Sliding Truck Rack

Strumento di confronto

86/100

TracRac

TracRac TracONE Universal Truck Rack

Truck Rackstruck_bed_rack

Altre opzioni

Portapacchi simili

Altri Truck Racks con le migliori valutazioni

93/100

Rhino-Rack

Rhino-Rack Reconn-Deck

Truck Rackstruck_bed_rack

Altri utenti hanno visualizzato

84/100

AA Products

AA Products Inc Adjustable Ladder Rack

Truck Racksladder_rack

Domande frequenti

The TracRac SR Sliding Truck Rack fits trucks with standard bed lengths. Clamps to your bed rails—no drilling. Usa il nostro verifica compatibilità below to verify your truck.

The TracRac SR Sliding Truck Rack holds 500 lbs total across 2 crossbar(s), each rated for 800.0 lbs. That covers ladders, lumber, kayaks, rooftop tents—the works. Distribute weight evenly across bars. Don't exceed either the per-bar or total rack limit.

The TracRac SR Sliding Truck Rack clamps onto your bed rails—no drilling. Install takes about 30 minutes with basic tools. Tighten clamps evenly on both sides. No permanent mods to your truck. Remove it in the same time if you sell the truck or change setups.

Yes—the TracRac SR Sliding Truck Rack is tonneau-cover compatible. Full bed access with the cover on or off. The rack sits above the bed rails, so you load from the sides or tailgate as normal. No interference with bed liners, toolboxes, or most tonneau covers.

The TracRac SR Sliding Truck Rack is height-adjustable from 24" to 34". Cab clearance: adjustable inches above the bed. Set it low for garage clearance or high for tall cargo. Measure your garage door height before setting the final position.

The TracRac SR Sliding Truck Rack is built from aluminum. Apply a rust-inhibitor if you drive in salt-belt states. Built to outlast the truck in most cases.

Risposta di our expert team, MyCargoRacks

Analisi delle prestazioni