Name: CVT Mt. Bachelor Softshell 48"
Brand: Cascadia Vehicle Tents
Price: 1999 USD
Availability: InStock

Question 1

Will the CVT Mt. Bachelor Softshell 48" fit my vehicle?

Accepted Answer

The CVT Mt. Bachelor Softshell 48" weighs 95.00 lbs. Your rack's dynamic load rating is the limiting factor—not static. Most factory crossbars handle 150–165 lbs dynamic. If you're close to the limit, aftermarket bars solve the problem. Use our compatibility checker to confirm.

Question 2

How much does the CVT Mt. Bachelor Softshell 48" weigh?

Accepted Answer

The CVT Mt. Bachelor Softshell 48" weighs 95.00 lbs (43.10 kg). Here's why that matters: your vehicle's dynamic roof load rating must comfortably exceed this weight. Add passengers sleeping inside (static load only) and you need the static rating to clear roughly 395.00 lbs total.

Question 3

How do I mount the CVT Mt. Bachelor Softshell 48"?

Accepted Answer

Installation takes two people and roughly 45 minutes. The CVT Mt. Bachelor Softshell 48" bolts to your crossbars using the included mounting hardware. Key requirement: verify your crossbar spread is between 24" and 48" before you start.

Question 4

Can I drive at highway speeds with the CVT Mt. Bachelor Softshell 48"?

Accepted Answer

Yes, but the CVT Mt. Bachelor Softshell 48"'s folded profile creates more wind resistance than a hardshell. Highway speeds of 65–70 mph are fine when properly secured. Here's why caution matters: check all buckles and straps before driving—a loose cover flapping at speed can tear fabric and damage the tent.

Question 5

Is the CVT Mt. Bachelor Softshell 48" weatherproof?

Accepted Answer

The CVT Mt. Bachelor Softshell 48" uses 600D poly-cotton canvas fabric with a 3000mm waterproof rating. Here's why that matters: 1500mm handles moderate rain, 3000mm+ handles sustained downpours. It's rated 3_plus. Seam-seal all zippers annually to maintain waterproofing over time.

Question 6

How long does it take to set up the CVT Mt. Bachelor Softshell 48"?

Accepted Answer

Expect about 0 minutes for a full setup of the CVT Mt. Bachelor Softshell 48". That includes unfolding, extending the ladder, and securing any rainfly or annex. Practice twice at home and you'll cut that time in half. Teardown takes roughly the same.

Question 7

Will the CVT Mt. Bachelor Softshell 48" affect my gas mileage?

Accepted Answer

Plan for a 15–20% fuel economy hit with the CVT Mt. Bachelor Softshell 48" installed. Here's why: 95.00 lbs of added weight plus aerodynamic drag increase consumption at all speeds. The penalty is worst above 65 mph where drag scales exponentially. Some owners only mount it for trips to minimize the ongoing cost.

Tent Type	Hardshell Clamshell
Sleeping Capacity	2 people
Season Rating	3 Plus
Setup Time	30 sec
Tent Weight	135 lbs
Garage Clearance OK	Yes

Mattress Thickness	3 in
Mattress Type	High Density Foam
Sleeping Area	26 sq ft
Has Annex	No
Ladder Included	Yes
Gas Strut Assisted	Yes
Windows	2
Doors	1
Crossbar Compatibility	round, square, aero, factory

Shell Material	Aluminum
Fabric Material	600D Poly-Cotton Canvas
Waterproof Rating	3000 mm
Interior Lighting	Yes
Shoe Storage	Yes
Has Awning	No

Model	Years	Fit	Requirements
Q5(2nd Gen (FY))	2017+	good	Crossbars needed
Q7(2nd Gen (4M))	2016+	good	Crossbars needed

Model	Years	Fit	Requirements
Q5(2nd Gen (FY))	2017+	good	Crossbars needed
Q7(2nd Gen (4M))	2016+	good	Crossbars needed

CVT Mt. Bachelor Softshell 48"

Quick Specs

Why the CVT Mt. Bachelor Softshell 48"?

Full Specifications

Dealbreaker Specs

Important Specs

Nice to Know

Technical Details

Additional Specs

Where to Buy

Insights for CVT Mt. Bachelor Softshell 48"

How It Compares

Score Breakdown

Category Position

Vehicle Compatibility

Audi

Top Comparisons

Walkabout 62 2.0

Similar Racks

Tuff Stuff Elite with Annex

Other People Also Viewed

iKamper Skycamp Mini 3.0