SeaSucker Monkey Bars — Surf Kit

Name: SeaSucker Monkey Bars Surf Kit
Brand: SeaSucker
Price: 367.08 EUR
Availability: InStock

Avis : MyCargoRacks.com est financé par ses lecteurs. Lorsque vous achetez via les liens de notre site, nous pouvons percevoir une commission d'affiliation sans frais supplémentaires pour vous. En savoir plus

SeaSucker SeaSucker Monkey Bars Surf Kit - Main product photo

Rédigé à l'origine par MyCargoRacks en anglais, traduit et adapté pour la pertinence locale. Contenu recherché et localisé pour les lecteurs de France.

En un coup d'œil

Fiche rapide

Carrier StyleSuction Cup

Max Boards4

Requires CrossbarsNon

Max Board Weight23 kg

Pourquoi ce produit

Pourquoi le SeaSucker Monkey Bars Surf Kit ?

The Monkey Bars kit is SeaSucker at its most versatile — it creates a full crossbar setup on any smooth roof using vacuum cups. Carry up to four boards with no permanent hardware. If you drive different vehicles or travel and want one system that works everywhere, this is it.

Spécifications détaillées

Toutes les spécifications

Carrier Style	Suction Cup
Max Boards	4
Requires Crossbars	No
Max Board Weight	23 kg
Fins On During Transport	Yes

Longboard Compatible	Yes
Shortboard Compatible	Yes
No-Rack Option	Yes
Locks Board	No
SUP Compatible	Yes
Wax Resistant	Yes
Salt Water Resistant	Yes

Padding Material	Rubber
Anti-Slip Surface	Yes

Meilleurs prix

Où acheter

Revendeur	Prix	Statut
Amazon	Voir le prix	Vérifier la disponibilité	Check Price

Analyse de performance

Analyse du SeaSucker Monkey Bars Surf Kit

Comment il se compare

vs. moyenne en surfboard_carrier

Détail de la note

Position dans la catégorie

Prix vs. note pour tous les surfboard_carrier

Alternatives

Comparaisons phares

Alternatives les plus pertinentes au SeaSucker Monkey Bars Surf Kit

Outil de comparaison

SeaSucker

SeaSucker Board Rack (Surf)

Surfboard Carrierssurf_suction_mount

Plus d'options

Supports similaires

Autres Surfboard Carriers les mieux notés

SeaSucker

SeaSucker Board Rack (Surf)

Surfboard Carrierssurf_suction_mount

D'autres personnes ont aussi consulté

Rhino-Rack

Rhino-Rack Universal Wrap Pads 28"

Surfboard Carrierssurf_soft_rack

Questions fréquentes

Foire aux questions

The SeaSucker Monkey Bars Surf Kit uses suction cups that attach to any smooth, clean roof surface. No crossbars required. Works on glass, metal, or painted surfaces. Avoid textured or vinyl-wrapped roofs. Utilise notre vérificateur de compatibilité below to check your vehicle.

Load your board fins-up (or fins-back depending on carrier style) and center it on the SeaSucker Monkey Bars Surf Kit. Use the included straps to cinch it down tight. Give each strap a firm tug—no play means a safe ride. Add a nose/tail line on highway trips for extra peace of mind.

The SeaSucker Monkey Bars Surf Kit holds up to 4 boards at once. Stack them with wax sides together (or use a board sock between them) to prevent ding damage. Total weight limit is 50.0 lbs—factor that for heavier longboards.

The SeaSucker Monkey Bars Surf Kit uses rubber to cradle your board without pressure points. The pads are wax-resistant so they won't bond to your board. Avoid over-tightening straps—snug is enough. Dings come from loading mistakes, not the carrier itself.

Yes—the SeaSucker Monkey Bars Surf Kit is rated for up to 80 mph when properly loaded and strapped. Check straps at every fuel stop on long drives. Wind can lift a loose board off your roof at highway speed, which is dangerous and expensive. Nose and tail tie-downs add serious insurance.

Yes—the SeaSucker Monkey Bars Surf Kit handles SUPs and surfboards interchangeably. SUPs are wider and heavier, so center them carefully and verify you're within the 50.0-lb weight limit. Same strapping method applies. Great versatile option if you ride both.

Répondu par Bill Nikolaou, Water Sports Editor

Analyse de performance